diff options
| author | krasimir <krasimir@chalmers.se> | 2009-06-13 18:02:06 +0000 |
|---|---|---|
| committer | krasimir <krasimir@chalmers.se> | 2009-06-13 18:02:06 +0000 |
| commit | f587501181219777618fbf58f6e4017e77e04c75 (patch) | |
| tree | 83d6b83a09209b44d4bcf6b1395352bd2694b962 | |
| parent | 4d8a5fbd501d1dfc97e1b167001dd97b064d89d5 (diff) | |
update the developers documentation with instructions for building and running the testsuite
| -rw-r--r-- | doc/darcs.html | 226 | ||||
| -rw-r--r-- | doc/darcs.txt | 182 | ||||
| -rw-r--r-- | doc/gf-developers.html | 451 | ||||
| -rw-r--r-- | doc/gf-developers.txt | 348 | ||||
| -rw-r--r-- | index.html | 8 | ||||
| -rw-r--r-- | index.txt | 4 | ||||
| -rw-r--r-- | src/INSTALL | 81 | ||||
| -rw-r--r-- | src/INSTALL.binary | 38 |
8 files changed, 805 insertions, 533 deletions
diff --git a/doc/darcs.html b/doc/darcs.html deleted file mode 100644 index 853a5e76c..000000000 --- a/doc/darcs.html +++ /dev/null @@ -1,226 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> -<HTML> -<HEAD> -<META NAME="generator" CONTENT="http://txt2tags.sf.net"> -<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8"> -<TITLE>GF Darcs repository</TITLE> -</HEAD><BODY BGCOLOR="white" TEXT="black"> -<P ALIGN="center"><CENTER><H1>GF Darcs repository</H1> -<FONT SIZE="4"> -<I>Author: Björn Bringert <bringert@cs.chalmers.se></I><BR> -Last update: Tue May 13 20:26:34 2008 -</FONT></CENTER> - -<P></P> -<HR NOSHADE SIZE=1> -<P></P> - <UL> - <LI><A HREF="#toc1">What is darcs?</A> - <LI><A HREF="#toc2">How do I install Darcs?</A> - <LI><A HREF="#toc3">Read-only access</A> - <UL> - <LI><A HREF="#toc4">Getting a fresh copy for read-only access</A> - <LI><A HREF="#toc5">Updating your copy</A> - <LI><A HREF="#toc6">Recording local changes</A> - <LI><A HREF="#toc7">Submitting patches</A> - </UL> - <LI><A HREF="#toc8">Read-write access</A> - <UL> - <LI><A HREF="#toc9">Getting a fresh copy</A> - <LI><A HREF="#toc10">Getting other people's changes?</A> - <LI><A HREF="#toc11">Commit your changes</A> - <LI><A HREF="#toc12">Apply a patch from someone else</A> - </UL> - <LI><A HREF="#toc13">Further information about Darcs</A> - </UL> - -<P></P> -<HR NOSHADE SIZE=1> -<P></P> -<A NAME="toc1"></A> -<H1>What is darcs?</H1> -<P> -Darcs is a decentralized revision control system. See <A HREF="http://darcs.net/">http://darcs.net/</A> for more information. -</P> -<A NAME="toc2"></A> -<H1>How do I install Darcs?</H1> -<P> -There are precompiled packages for many platforms available at -<A HREF="http://darcs.net/DarcsWiki/CategoryBinaries">http://darcs.net/DarcsWiki/CategoryBinaries</A>. -</P> -<P> -There is also source code if you want to compile it yourself. Darcs is -written in Haskell and you need GHC to compile it. -</P> -<A NAME="toc3"></A> -<H1>Read-only access</H1> -<A NAME="toc4"></A> -<H2>Getting a fresh copy for read-only access</H2> -<P> -Anyone can get the latest development version of GF by running (all on one line): -</P> -<PRE> - $ darcs get --partial --set-scripts-executable http://code.haskell.org/gf/ -</PRE> -<P></P> -<P> -This will create a directory called <CODE>gf</CODE> in the current -directory. See <CODE>gf/src/INSTALL</CODE> for instructions on compiling. The -main difference compared to compiling a GF release is that you -need to run <CODE>autoconf</CODE> before <CODE>./configure</CODE>. -</P> -<A NAME="toc5"></A> -<H2>Updating your copy</H2> -<P> -To get all new patches from the main repo: -</P> -<PRE> - $ darcs pull -a -</PRE> -<P></P> -<P> -This can be done anywhere in your local repository, i.e. in the <CODE>gf</CODE> -directory, or any of its subdirectories. -</P> -<P> -Without <CODE>-a</CODE>, you can choose which patches you want to get. -</P> -<A NAME="toc6"></A> -<H2>Recording local changes</H2> -<P> -Since every copy is a repository, you can have local version control -of your changes. -</P> -<P> -If you have added files, you first need to tell your local repository to -keep them under revision control: -</P> -<PRE> - $ darcs add file1 file2 ... -</PRE> -<P></P> -<P> -To record changes, use: -</P> -<PRE> - $ darcs record -</PRE> -<P></P> -<P> -This creates a patch against the previous version and stores it in your -local repository. You can record any number of changesets before -pushing them to the main repo. In fact, you don't have to push them at -all if you want to keep the changes only in your local repo. -</P> -<P> -If you think there are too many questions about what to record, you -can use the <CODE>-a</CODE> flag to <CODE>record</CODE>. Or answer <CODE>a</CODE> to the first -question. Both of these record all the changes you have in your local -repository. -</P> -<A NAME="toc7"></A> -<H2>Submitting patches</H2> -<P> -If you are using read-only access, send your patches by email to -someone with write-access. First record your changes in your local -repository, as described above. You can send any number of recorded -patches as one patch bundle. You create the patch bundle with: -</P> -<PRE> - $ darcs send -o mypatch.patch - $ gzip mypatch.patch -</PRE> -<P></P> -<P> -(where <CODE>mypatch</CODE> is hopefully replaced by a slightly more -descriptive name). Since some e-mail setups change text attachments -(most likely by changing the newline characters) you need to send -the patch in some compressed format, such as GZIP, BZIP2 or ZIP. -</P> -<P> -Send it as an e-mail attachment. If you have -sendmail or something equivalent installed, it is possible to send the -patch directly from darcs. If so, replace <CODE>-o mypatch.patch</CODE> with -<CODE>--to=EMAIL</CODE> where <CODE>EMAIL</CODE> is the address to send it to. -</P> -<A NAME="toc8"></A> -<H1>Read-write access</H1> -<P> -If you have a user account on code.haskell.org, you can get read-write access over SSH -to the GF repository. -To get an account, <A HREF="http://community.haskell.org/admin/account_request.html">fill out this form</A>. -Once you have an account, ask <<A HREF="mailto:bringert@cs.chalmers.se">bringert@cs.chalmers.se</A>> to add you to the <CODE>gf</CODE> project. -</P> -<A NAME="toc9"></A> -<H2>Getting a fresh copy</H2> -<P> -Get your copy with (all on one line), -replacing <CODE>bringert</CODE> with your own username on code.haskell.org: -</P> -<PRE> - $ darcs get --partial --set-scripts-executable bringert@code.haskell.org:/srv/code/gf -</PRE> -<P></P> -<P> -The option <CODE>--partial</CODE> means that you do not download all of the -history for the repository. This saves space, bandwidth and CPU time, -and most people don't need the full history of all changes in the -past. -</P> -<A NAME="toc10"></A> -<H2>Getting other people's changes?</H2> -<P> -Get all new patches from the main repo: -</P> -<PRE> - $ darcs pull -a -</PRE> -<P></P> -<P> -Without <CODE>-a</CODE>, you can choose which patches you want to get. -</P> -<A NAME="toc11"></A> -<H2>Commit your changes</H2> -<P> -There are two steps to commiting a change to the main repo. First you -have to record the changes that you want to commit, then you push them -to the main repo. -</P> -<P> -For instructions on recording your changes locally, -see "Recording local changes" above. -</P> -<P> -Then you can push the patch(es) to the main repo. If you are using -ssh-access, all you need to do is: -</P> -<PRE> - $ darcs push -</PRE> -<P></P> -<P> -If you use the <CODE>-a</CODE> flag to push, all local patches which are not in -the main repo are pushed. -</P> -<A NAME="toc12"></A> -<H2>Apply a patch from someone else</H2> -<P> -Use: -</P> -<PRE> - $ darcs apply < mypatch.patch -</PRE> -<P></P> -<P> -This applies the patch to your local repository. To commit it to the -main repo, use <CODE>darcs push</CODE>. -</P> -<A NAME="toc13"></A> -<H1>Further information about Darcs</H1> -<P> -For more info about what you can do with darcs, see <A HREF="http://darcs.net/manual/">http://darcs.net/manual/</A> -</P> - -<!-- html code generated by txt2tags 2.4 (http://txt2tags.sf.net) --> -<!-- cmdline: txt2tags darcs.txt --> -</BODY></HTML> diff --git a/doc/darcs.txt b/doc/darcs.txt deleted file mode 100644 index 22f1a545f..000000000 --- a/doc/darcs.txt +++ /dev/null @@ -1,182 +0,0 @@ -GF Darcs repository -Author: Björn Bringert <bringert@cs.chalmers.se> -Last update: %%date(%c) - -% NOTE: this is a txt2tags file. -% Create an html file from this file using: -% txt2tags -t html --toc darcs.txt - -%!target:html -%!options(html): --toc -%!encoding:utf-8 - -= What is darcs? = - -Darcs is a decentralized revision control system. See http://darcs.net/ for more information. - -= How do I install Darcs? = - -There are precompiled packages for many platforms available at -http://darcs.net/DarcsWiki/CategoryBinaries. - -There is also source code if you want to compile it yourself. Darcs is -written in Haskell and you need GHC to compile it. - -= Read-only access = - -== Getting a fresh copy for read-only access == - -Anyone can get the latest development version of GF by running (all on one line): - -``` -$ darcs get --partial --set-scripts-executable http://code.haskell.org/gf/ -``` - -This will create a directory called ``gf`` in the current -directory. See ``gf/src/INSTALL`` for instructions on compiling. The -main difference compared to compiling a GF release is that you -need to run ``autoconf`` before ``./configure``. - - -== Updating your copy == - -To get all new patches from the main repo: - -``` -$ darcs pull -a -``` - -This can be done anywhere in your local repository, i.e. in the ``gf`` -directory, or any of its subdirectories. - -Without ``-a``, you can choose which patches you want to get. - - -== Recording local changes == - -Since every copy is a repository, you can have local version control -of your changes. - -If you have added files, you first need to tell your local repository to -keep them under revision control: - -``` -$ darcs add file1 file2 ... -``` - -To record changes, use: - -``` -$ darcs record -``` - -This creates a patch against the previous version and stores it in your -local repository. You can record any number of changesets before -pushing them to the main repo. In fact, you don't have to push them at -all if you want to keep the changes only in your local repo. - -If you think there are too many questions about what to record, you -can use the ``-a`` flag to ``record``. Or answer ``a`` to the first -question. Both of these record all the changes you have in your local -repository. - - -== Submitting patches == - -If you are using read-only access, send your patches by email to -someone with write-access. First record your changes in your local -repository, as described above. You can send any number of recorded -patches as one patch bundle. You create the patch bundle with: - -``` -$ darcs send -o mypatch.patch -$ gzip mypatch.patch -``` - -(where ``mypatch`` is hopefully replaced by a slightly more -descriptive name). Since some e-mail setups change text attachments -(most likely by changing the newline characters) you need to send -the patch in some compressed format, such as GZIP, BZIP2 or ZIP. - -Send it as an e-mail attachment. If you have -sendmail or something equivalent installed, it is possible to send the -patch directly from darcs. If so, replace ``-o mypatch.patch`` with -``--to=EMAIL`` where ``EMAIL`` is the address to send it to. - - - - - -= Read-write access = - -If you have a user account on code.haskell.org, you can get read-write access over SSH -to the GF repository. -To get an account, [fill out this form http://community.haskell.org/admin/account_request.html]. -Once you have an account, ask <bringert@cs.chalmers.se> to add you to the ``gf`` project. - - -== Getting a fresh copy == - -Get your copy with (all on one line), -replacing ``bringert`` with your own username on code.haskell.org: - -``` -$ darcs get --partial --set-scripts-executable bringert@code.haskell.org:/srv/code/gf -``` - -The option ``--partial`` means that you do not download all of the -history for the repository. This saves space, bandwidth and CPU time, -and most people don't need the full history of all changes in the -past. - - -== Getting other people's changes? == - -Get all new patches from the main repo: - -``` -$ darcs pull -a -``` - -Without ``-a``, you can choose which patches you want to get. - - - -== Commit your changes == - -There are two steps to commiting a change to the main repo. First you -have to record the changes that you want to commit, then you push them -to the main repo. - -For instructions on recording your changes locally, -see "Recording local changes" above. - -Then you can push the patch(es) to the main repo. If you are using -ssh-access, all you need to do is: - -``` -$ darcs push -``` - -If you use the ``-a`` flag to push, all local patches which are not in -the main repo are pushed. - - - -== Apply a patch from someone else == - -Use: - -``` -$ darcs apply < mypatch.patch -``` - -This applies the patch to your local repository. To commit it to the -main repo, use ``darcs push``. - -= Further information about Darcs = - - -For more info about what you can do with darcs, see http://darcs.net/manual/ - - diff --git a/doc/gf-developers.html b/doc/gf-developers.html new file mode 100644 index 000000000..b7655445d --- /dev/null +++ b/doc/gf-developers.html @@ -0,0 +1,451 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> +<HTML> +<HEAD> +<META NAME="generator" CONTENT="http://txt2tags.sf.net"> +<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8"> +<TITLE>GF Developers Guide</TITLE> +</HEAD><BODY BGCOLOR="white" TEXT="black"> +<P ALIGN="center"><CENTER><H1>GF Developers Guide</H1> +<FONT SIZE="4"> +<I>Authors: Björn Bringert and Krasimir Angelov</I><BR> +Last update: Sat Jun 13 20:00:21 2009 +</FONT></CENTER> + +<P></P> +<HR NOSHADE SIZE=1> +<P></P> + <UL> + <LI><A HREF="#toc1">Setting up your system for building GF</A> + <LI><A HREF="#toc2">Getting the sources</A> + <UL> + <LI><A HREF="#toc3">Read-only access</A> + <UL> + <LI><A HREF="#toc4">Getting a fresh copy for read-only access</A> + <LI><A HREF="#toc5">Updating your copy</A> + <LI><A HREF="#toc6">Recording local changes</A> + <LI><A HREF="#toc7">Submitting patches</A> + </UL> + <LI><A HREF="#toc8">Read-write access</A> + <UL> + <LI><A HREF="#toc9">Getting a fresh copy</A> + <LI><A HREF="#toc10">Getting other people's changes?</A> + <LI><A HREF="#toc11">Commit your changes</A> + <LI><A HREF="#toc12">Apply a patch from someone else</A> + </UL> + <LI><A HREF="#toc13">Further information about Darcs</A> + </UL> + <LI><A HREF="#toc14">Compilation from sources</A> + <UL> + <LI><A HREF="#toc15">Configure</A> + <LI><A HREF="#toc16">Build</A> + <LI><A HREF="#toc17">Install</A> + <LI><A HREF="#toc18">Clean</A> + <LI><A HREF="#toc19">SDist</A> + </UL> + <LI><A HREF="#toc20">Compilation with make</A> + <LI><A HREF="#toc21">Running the testsuite</A> + </UL> + +<P></P> +<HR NOSHADE SIZE=1> +<P></P> +<A NAME="toc1"></A> +<H1>Setting up your system for building GF</H1> +<P> +Before to build GF from sources you need to install some tools on your system. +GF is written in Haskell, so first of all you need recent version of the Haskell compiler GHC. +Currently we use GHC 6.10.3 and we recommend that you should use the same version +as well. This version is not backward compatible with the previous major releases +so you cannot use previous versions. GHC is available from here: +</P> +<P> +<A HREF="http://www.haskell.org/ghc/">http://www.haskell.org/ghc/</A> +</P> +<P> +Once you have installed GHC, open a terminal (Command Prompt on Windows) and try +to execute the following command: +</P> +<PRE> + $ ghc --version +</PRE> +<P> +This command should show you which version of GHC you have. If the installation +of GHC was successful you should see message like: +</P> +<PRE> + The Glorious Glasgow Haskell Compilation System, version 6.10.3 +</PRE> +<P> +The other two tools that we use are the lexer generator for Haskell - Alex: +<A HREF="http://www.haskell.org/alex/">http://www.haskell.org/alex/</A> +and the parser generator - Happy: +<A HREF="http://www.haskell.org/happy/">http://www.haskell.org/happy/</A>. +Again after the installation check that the tools are available from the terminal. +If they are not then probably you have to update the current search path in your system. +</P> +<P> +Before to get the GF sources you also need Darcs. Darcs is a decentralized revision control system, +see: <A HREF="http://darcs.net/">http://darcs.net/</A> for more information. There are precompiled packages for many platforms available at +<A HREF="http://darcs.net/DarcsWiki/CategoryBinaries">http://darcs.net/DarcsWiki/CategoryBinaries</A>. There is also source code if you want to compile it yourself. Darcs is +also written in Haskell and so you can GHC to compile it. +</P> +<A NAME="toc2"></A> +<H1>Getting the sources</H1> +<P> +Once you have all tools in place you can get the GF sources. If you just want to compile and use GF +then it is enough to have read-only access. It is also possible to make changes in the sources but if +you want these changes to be applied back to the main sources you will have to send the changes to us. +If you plan to work continuously on GF then you should consider to get read-write access. +</P> +<A NAME="toc3"></A> +<H2>Read-only access</H2> +<A NAME="toc4"></A> +<H3>Getting a fresh copy for read-only access</H3> +<P> +Anyone can get the latest development version of GF by running (all on one line): +</P> +<PRE> + $ darcs get --partial --set-scripts-executable http://code.haskell.org/gf/ +</PRE> +<P></P> +<P> +This will create a directory called <CODE>gf</CODE> in the current +directory. +</P> +<A NAME="toc5"></A> +<H3>Updating your copy</H3> +<P> +To get all new patches from the main repo: +</P> +<PRE> + $ darcs pull -a +</PRE> +<P> +This can be done anywhere in your local repository, i.e. in the <CODE>gf</CODE> +directory, or any of its subdirectories. +Without <CODE>-a</CODE>, you can choose which patches you want to get. +</P> +<A NAME="toc6"></A> +<H3>Recording local changes</H3> +<P> +Since every copy is a repository, you can have local version control +of your changes. +</P> +<P> +If you have added files, you first need to tell your local repository to +keep them under revision control: +</P> +<PRE> + $ darcs add file1 file2 ... +</PRE> +<P></P> +<P> +To record changes, use: +</P> +<PRE> + $ darcs record +</PRE> +<P></P> +<P> +This creates a patch against the previous version and stores it in your +local repository. You can record any number of changes before +pushing them to the main repo. In fact, you don't have to push them at +all if you want to keep the changes only in your local repo. +</P> +<P> +If you think there are too many questions about what to record, you +can use the <CODE>-a</CODE> flag to <CODE>record</CODE>. Or answer <CODE>a</CODE> to the first +question. Both of these record all the changes you have in your local +repository. +</P> +<A NAME="toc7"></A> +<H3>Submitting patches</H3> +<P> +If you are using read-only access, send your patches by email to +someone with write-access. First record your changes in your local +repository, as described above. You can send any number of recorded +patches as one patch bundle. You create the patch bundle with: +</P> +<PRE> + $ darcs send -o mypatch.patch + $ gzip mypatch.patch +</PRE> +<P></P> +<P> +(where <CODE>mypatch</CODE> is hopefully replaced by a slightly more +descriptive name). Since some e-mail setups change text attachments +(most likely by changing the newline characters) you need to send +the patch in some compressed format, such as GZIP, BZIP2 or ZIP. +</P> +<P> +Send it as an e-mail attachment. If you have +sendmail or something equivalent installed, it is possible to send the +patch directly from darcs. If so, replace <CODE>-o mypatch.patch</CODE> with +<CODE>--to=EMAIL</CODE> where <CODE>EMAIL</CODE> is the address to send it to. +</P> +<A NAME="toc8"></A> +<H2>Read-write access</H2> +<P> +If you have a user account on code.haskell.org, you can get read-write access over SSH +to the GF repository. +To get an account, <A HREF="http://community.haskell.org/admin/account_request.html">fill out this form</A>. +Once you have an account, ask <<A HREF="mailto:aarne@chalmers.se">aarne@chalmers.se</A>> to add you to the <CODE>GF</CODE> project. +</P> +<A NAME="toc9"></A> +<H3>Getting a fresh copy</H3> +<P> +Get your copy with (all on one line), +replacing <CODE>bringert</CODE> with your own username on code.haskell.org: +</P> +<PRE> + $ darcs get --partial --set-scripts-executable bringert@code.haskell.org:/srv/code/gf +</PRE> +<P></P> +<P> +The option <CODE>--partial</CODE> means that you do not download all of the +history for the repository. This saves space, bandwidth and CPU time, +and most people don't need the full history of all changes in the +past. +</P> +<A NAME="toc10"></A> +<H3>Getting other people's changes?</H3> +<P> +Get all new patches from the main repo: +</P> +<PRE> + $ darcs pull -a +</PRE> +<P></P> +<P> +Without <CODE>-a</CODE>, you can choose which patches you want to get. +</P> +<A NAME="toc11"></A> +<H3>Commit your changes</H3> +<P> +There are two steps to commiting a change to the main repo. First you +have to record the changes that you want to commit, then you push them +to the main repo. For instructions on recording your changes locally, +see "Recording local changes" above. Then you can push the patch(es) to +the main repo. If you are using ssh-access, all you need to do is: +</P> +<PRE> + $ darcs push +</PRE> +<P></P> +<P> +If you use the <CODE>-a</CODE> flag to push, all local patches which are not in +the main repo are pushed. +</P> +<A NAME="toc12"></A> +<H3>Apply a patch from someone else</H3> +<P> +Use: +</P> +<PRE> + $ darcs apply < mypatch.patch +</PRE> +<P></P> +<P> +This applies the patch to your local repository. To commit it to the +main repo, use <CODE>darcs push</CODE>. +</P> +<A NAME="toc13"></A> +<H2>Further information about Darcs</H2> +<P> +For more info about what you can do with darcs, see <A HREF="http://darcs.net/manual/">http://darcs.net/manual/</A> +</P> +<A NAME="toc14"></A> +<H1>Compilation from sources</H1> +<P> +The build system of GF is based on Cabal (see <A HREF="http://www.haskell.org/cabal/">http://www.haskell.org/cabal/</A> for more information). +Cabal is installed by default together with the GHC compiler. This is actually a library which could +be used from Haskell to compile projects written in Haskell. The entry point is a script +called Setup.hs which is placed in the top directory of every project managed with Cabal. +The three main steps that are needed for compilation are much like what you do in a project +written in C, you have: configure, build and install. +</P> +<A NAME="toc15"></A> +<H2>Configure</H2> +<P> +During the configuration phase Cabal will check that you have all necessary tools and libraries +needed for GF. The configuration is started by the command: +</P> +<PRE> + $ runghc Setup.hs configure +</PRE> +<P> +The command <CODE>`runghc`</CODE> comes with the GHC compiler and is batch interpreter which executes +the specified script without the need to compile it advance. Setup.hs is our compilation driver +which is based on Cabal. If you don't see any error message from the above command then +you have everything that is needed for GF. You can also add the option <CODE>`-v`</CODE> to see +more details about the configuration. +</P> +<A NAME="toc16"></A> +<H2>Build</H2> +<P> +The build phase does two things. First it builds the GF compiler from the Haskell sources +and after that it builds the GF Resource Grammar Library using the already build compiler. +The simplest command is: +</P> +<PRE> + $ runghc Setup.hs build +</PRE> +<P> +Again you can add the option <CODE>`-v`</CODE> if you want to see more details. +</P> +<P> +Sometimes you just want to work on the GF compiler and don't want to recompile the resource +library after each change. In this case use this extended command: +</P> +<PRE> + $ runghc Setup.hs build rgl-none +</PRE> +<P> +The resource library could also be compiled in two modes: with present tense only and +with all tenses. By default it is compiled with all tenses. If you want to use +the library with only present tense you can compile it in this special mode with +the command: +</P> +<PRE> + $ runghc Setup.hs build present +</PRE> +<P> +Before to use this command make sure that the script lib/src/mkPresent has executable +permissions on Linux. +</P> +<P> +You could also control which languages you want to be recompiled by adding the option +<CODE>`langs=list`</CODE>. For example the following command will compile only the English and the Swedish +language: +</P> +<PRE> + $ runghc Setup.hs build langs=Eng,Swe +</PRE> +<P></P> +<A NAME="toc17"></A> +<H2>Install</H2> +<P> +After you have compiled GF you can install the binaries to make the system usable. +On Linux you will need root privileges to do this. Use the command: +</P> +<PRE> + $ su +</PRE> +<P> +and enter the root password. This step should be skipped on Windows. +</P> +<P> +The installation itself is started with the command: +</P> +<PRE> + $ runghc Setup.hs install +</PRE> +<P> +This command installs the GF compiler in the default place for executable +files in your system. For example on Linux this is usualy /usr/local/bin and on +Windows this is c:\Program Files\Haskell\bin. If you want to install in some +other place then use the <CODE>`--prefix`</CODE> option during the configuration phase. +</P> +<P> +The compiled GF Resource Grammar Library will be installed in /usr/local/share/gf-3.0/lib +on Linux and in c:\Program Files\Haskell\gf-3.0\lib on Windows. Again the location could +be changed using the <CODE>`--prefix`</CODE> option. +</P> +<A NAME="toc18"></A> +<H2>Clean</H2> +<P> +Sometimes you want to clean up the compilation and start again from clean +sources. Use the clean command for this purpose: +</P> +<PRE> + $ runghc Setup.hs clean +</PRE> +<P></P> +<A NAME="toc19"></A> +<H2>SDist</H2> +<P> +You can use the command: +</P> +<PRE> + $ runghc Setup.hs sdist +</PRE> +<P> +to prepare archive with all source codes needed to compile GF. +</P> +<A NAME="toc20"></A> +<H1>Compilation with make</H1> +<P> +If you feel more comfortable with Makefiles then there is a thin Makefile +wrapper arround Cabal for you. If you just type: +</P> +<PRE> + $ make +</PRE> +<P> +the configuration phase will be run automatically if needed and after that +the sources will be compiled. If you don't want to compile the resource library +every time then you can use: +</P> +<PRE> + $ make gf +</PRE> +<P> +For installation use: +</P> +<PRE> + $ make install +</PRE> +<P> +For cleaning: +</P> +<PRE> + $ make clean +</PRE> +<P> +and to build source distribution archive run: +</P> +<PRE> + $ make sdist +</PRE> +<P></P> +<A NAME="toc21"></A> +<H1>Running the testsuite</H1> +<P> +GF has testsuite. It is run with the following command: +</P> +<PRE> + $ runghc Setup.hs test +</PRE> +<P> +The testsuite architecture for GF is very simple but still very flexible. +GF by itself is an interpreter and could execute commands in batch mode. +This is everything that we need to organize a testsuite. The root of the +testsuite is the testsuite/ directory. It contains subdirectories which +themself contain GF batch files (with extension .gfs). The above command +searches the subdirectories of the testsuite/ directory for files with extension +.gfs and when it finds one it is executed with the GF interpreter. +The output of the script is stored in file with extension .out and is compared +with the content of the corresponding file with extension .gold, if there is one. +If the contents are identical the command reports that the test was passed successfully. +Otherwise the test had failed. +</P> +<P> +Every time when you make some changes to GF that have to be tested, instead of +writing the commands by hand in the GF shell, add them to one .gfs file in the testsuite +and run the test. In this way you can use the same test later and we will be sure +that we will not incidentaly break your code later. +</P> +<P> +If you don't want to run the whole testsuite you can write the path to the subdirectory +in which you are interested. For example: +</P> +<PRE> + $ runghc Setup.hs test testsuite/compiler +</PRE> +<P> +will run only the testsuite for the compiler. +</P> + +<!-- html code generated by txt2tags 2.5 (http://txt2tags.sf.net) --> +<!-- cmdline: txt2tags gf-developers.txt --> +</BODY></HTML> diff --git a/doc/gf-developers.txt b/doc/gf-developers.txt new file mode 100644 index 000000000..20cff3028 --- /dev/null +++ b/doc/gf-developers.txt @@ -0,0 +1,348 @@ +GF Developers Guide +Authors: Björn Bringert and Krasimir Angelov +Last update: %%date(%c) + +% NOTE: this is a txt2tags file. +% Create an html file from this file using: +% txt2tags -t html --toc darcs.txt + +%!target:html +%!options(html): --toc +%!encoding:utf-8 + += Setting up your system for building GF = + +Before to build GF from sources you need to install some tools on your system. +GF is written in Haskell, so first of all you need recent version of the Haskell compiler GHC. +Currently we use GHC 6.10.3 and we recommend that you should use the same version +as well. This version is not backward compatible with the previous major releases +so you cannot use previous versions. GHC is available from here: + +http://www.haskell.org/ghc/ + +Once you have installed GHC, open a terminal (Command Prompt on Windows) and try +to execute the following command: +``` +$ ghc --version +``` +This command should show you which version of GHC you have. If the installation +of GHC was successful you should see message like: +``` +The Glorious Glasgow Haskell Compilation System, version 6.10.3 +``` +The other two tools that we use are the lexer generator for Haskell - Alex: +http://www.haskell.org/alex/ +and the parser generator - Happy: +http://www.haskell.org/happy/. +Again after the installation check that the tools are available from the terminal. +If they are not then probably you have to update the current search path in your system. + +Before to get the GF sources you also need Darcs. Darcs is a decentralized revision control system, +see: http://darcs.net/ for more information. There are precompiled packages for many platforms available at +http://darcs.net/DarcsWiki/CategoryBinaries. There is also source code if you want to compile it yourself. Darcs is +also written in Haskell and so you can GHC to compile it. + += Getting the sources = + +Once you have all tools in place you can get the GF sources. If you just want to compile and use GF +then it is enough to have read-only access. It is also possible to make changes in the sources but if +you want these changes to be applied back to the main sources you will have to send the changes to us. +If you plan to work continuously on GF then you should consider to get read-write access. + +== Read-only access == + +=== Getting a fresh copy for read-only access === + +Anyone can get the latest development version of GF by running (all on one line): + +``` +$ darcs get --partial --set-scripts-executable http://code.haskell.org/gf/ +``` + +This will create a directory called ``gf`` in the current +directory. + + +=== Updating your copy === + +To get all new patches from the main repo: +``` +$ darcs pull -a +``` +This can be done anywhere in your local repository, i.e. in the ``gf`` +directory, or any of its subdirectories. +Without ``-a``, you can choose which patches you want to get. + + +=== Recording local changes === + +Since every copy is a repository, you can have local version control +of your changes. + +If you have added files, you first need to tell your local repository to +keep them under revision control: + +``` +$ darcs add file1 file2 ... +``` + +To record changes, use: + +``` +$ darcs record +``` + +This creates a patch against the previous version and stores it in your +local repository. You can record any number of changes before +pushing them to the main repo. In fact, you don't have to push them at +all if you want to keep the changes only in your local repo. + +If you think there are too many questions about what to record, you +can use the ``-a`` flag to ``record``. Or answer ``a`` to the first +question. Both of these record all the changes you have in your local +repository. + + +=== Submitting patches === + +If you are using read-only access, send your patches by email to +someone with write-access. First record your changes in your local +repository, as described above. You can send any number of recorded +patches as one patch bundle. You create the patch bundle with: + +``` +$ darcs send -o mypatch.patch +$ gzip mypatch.patch +``` + +(where ``mypatch`` is hopefully replaced by a slightly more +descriptive name). Since some e-mail setups change text attachments +(most likely by changing the newline characters) you need to send +the patch in some compressed format, such as GZIP, BZIP2 or ZIP. + +Send it as an e-mail attachment. If you have +sendmail or something equivalent installed, it is possible to send the +patch directly from darcs. If so, replace ``-o mypatch.patch`` with +``--to=EMAIL`` where ``EMAIL`` is the address to send it to. + + + + + +== Read-write access == + +If you have a user account on code.haskell.org, you can get read-write access over SSH +to the GF repository. +To get an account, [fill out this form http://community.haskell.org/admin/account_request.html]. +Once you have an account, ask <aarne@chalmers.se> to add you to the ``GF`` project. + + +=== Getting a fresh copy === + +Get your copy with (all on one line), +replacing ``bringert`` with your own username on code.haskell.org: + +``` +$ darcs get --partial --set-scripts-executable bringert@code.haskell.org:/srv/code/gf +``` + +The option ``--partial`` means that you do not download all of the +history for the repository. This saves space, bandwidth and CPU time, +and most people don't need the full history of all changes in the +past. + + +=== Getting other people's changes? === + +Get all new patches from the main repo: + +``` +$ darcs pull -a +``` + +Without ``-a``, you can choose which patches you want to get. + + + +=== Commit your changes === + +There are two steps to commiting a change to the main repo. First you +have to record the changes that you want to commit, then you push them +to the main repo. For instructions on recording your changes locally, +see "Recording local changes" above. Then you can push the patch(es) to +the main repo. If you are using ssh-access, all you need to do is: + +``` +$ darcs push +``` + +If you use the ``-a`` flag to push, all local patches which are not in +the main repo are pushed. + + + +=== Apply a patch from someone else === + +Use: + +``` +$ darcs apply < mypatch.patch +``` + +This applies the patch to your local repository. To commit it to the +main repo, use ``darcs push``. + +== Further information about Darcs == + + +For more info about what you can do with darcs, see http://darcs.net/manual/ + + += Compilation from sources = + +The build system of GF is based on Cabal (see http://www.haskell.org/cabal/ for more information). +Cabal is installed by default together with the GHC compiler. This is actually a library which could +be used from Haskell to compile projects written in Haskell. The entry point is a script +called Setup.hs which is placed in the top directory of every project managed with Cabal. +The three main steps that are needed for compilation are much like what you do in a project +written in C, you have: configure, build and install. + + +== Configure == + +During the configuration phase Cabal will check that you have all necessary tools and libraries +needed for GF. The configuration is started by the command: +``` +$ runghc Setup.hs configure +``` +The command ```runghc``` comes with the GHC compiler and is batch interpreter which executes +the specified script without the need to compile it advance. Setup.hs is our compilation driver +which is based on Cabal. If you don't see any error message from the above command then +you have everything that is needed for GF. You can also add the option ```-v``` to see +more details about the configuration. + +== Build == + +The build phase does two things. First it builds the GF compiler from the Haskell sources +and after that it builds the GF Resource Grammar Library using the already build compiler. +The simplest command is: +``` +$ runghc Setup.hs build +``` +Again you can add the option ```-v``` if you want to see more details. + +Sometimes you just want to work on the GF compiler and don't want to recompile the resource +library after each change. In this case use this extended command: +``` +$ runghc Setup.hs build rgl-none +``` +The resource library could also be compiled in two modes: with present tense only and +with all tenses. By default it is compiled with all tenses. If you want to use +the library with only present tense you can compile it in this special mode with +the command: +``` +$ runghc Setup.hs build present +``` +Before to use this command make sure that the script lib/src/mkPresent has executable +permissions on Linux. + +You could also control which languages you want to be recompiled by adding the option +```langs=list```. For example the following command will compile only the English and the Swedish +language: +``` +$ runghc Setup.hs build langs=Eng,Swe +``` + +== Install == + +After you have compiled GF you can install the binaries to make the system usable. +On Linux you will need root privileges to do this. Use the command: +``` +$ su +``` +and enter the root password. This step should be skipped on Windows. + +The installation itself is started with the command: +``` +$ runghc Setup.hs install +``` +This command installs the GF compiler in the default place for executable +files in your system. For example on Linux this is usualy /usr/local/bin and on +Windows this is c:\Program Files\Haskell\bin. If you want to install in some +other place then use the ```--prefix``` option during the configuration phase. + +The compiled GF Resource Grammar Library will be installed in /usr/local/share/gf-3.0/lib +on Linux and in c:\Program Files\Haskell\gf-3.0\lib on Windows. Again the location could +be changed using the ```--prefix``` option. + +== Clean == + +Sometimes you want to clean up the compilation and start again from clean +sources. Use the clean command for this purpose: +``` +$ runghc Setup.hs clean +``` + +== SDist == + +You can use the command: +``` +$ runghc Setup.hs sdist +``` +to prepare archive with all source codes needed to compile GF. + += Compilation with make = + +If you feel more comfortable with Makefiles then there is a thin Makefile +wrapper arround Cabal for you. If you just type: +``` +$ make +``` +the configuration phase will be run automatically if needed and after that +the sources will be compiled. If you don't want to compile the resource library +every time then you can use: +``` +$ make gf +``` +For installation use: +``` +$ make install +``` +For cleaning: +``` +$ make clean +``` +and to build source distribution archive run: +``` +$ make sdist +``` + += Running the testsuite = + +GF has testsuite. It is run with the following command: +``` +$ runghc Setup.hs test +``` +The testsuite architecture for GF is very simple but still very flexible. +GF by itself is an interpreter and could execute commands in batch mode. +This is everything that we need to organize a testsuite. The root of the +testsuite is the testsuite/ directory. It contains subdirectories which +themself contain GF batch files (with extension .gfs). The above command +searches the subdirectories of the testsuite/ directory for files with extension +.gfs and when it finds one it is executed with the GF interpreter. +The output of the script is stored in file with extension .out and is compared +with the content of the corresponding file with extension .gold, if there is one. +If the contents are identical the command reports that the test was passed successfully. +Otherwise the test had failed. + +Every time when you make some changes to GF that have to be tested, instead of +writing the commands by hand in the GF shell, add them to one .gfs file in the testsuite +and run the test. In this way you can use the same test later and we will be sure +that we will not incidentaly break your code later. + +If you don't want to run the whole testsuite you can write the path to the subdirectory +in which you are interested. For example: +``` +$ runghc Setup.hs test testsuite/compiler +``` +will run only the testsuite for the compiler. diff --git a/index.html b/index.html index 60544772d..d65f9b8c7 100644 --- a/index.html +++ b/index.html @@ -36,7 +36,7 @@ June 2008 <P> <CODE>[</CODE> <A HREF="demos/index.html">Demos</A> <CODE>|</CODE> <A HREF="download/index.html">Download</A> -<CODE>|</CODE> <A HREF="doc/darcs.html">Developers</A> +<CODE>|</CODE> <A HREF="doc/gf-developers.html">Developers</A> <CODE>|</CODE> <A HREF="lib/resource/doc/synopsis.html">Libraries</A> <CODE>|</CODE> <A HREF="doc/gf-people.html">People</A> <CODE>|</CODE> <A HREF="doc/gf-bibliography.html">Publications</A> @@ -219,7 +219,7 @@ support for an increasing number of languages, currently including <LI>Hindi/Urdu (fragments) <LI><A HREF="http://www.interlingua.com/">Interlingua</A> <LI>Italian -<LI>Norwegian bokmål +<LI>Norwegian bokm�l <LI>Russian <LI>Spanish <LI>Swedish @@ -232,6 +232,6 @@ months - contributions are welcome! </P> -<!-- html code generated by txt2tags 2.4 (http://txt2tags.sf.net) --> -<!-- cmdline: txt2tags -thtml index.txt --> +<!-- html code generated by txt2tags 2.5 (http://txt2tags.sf.net) --> +<!-- cmdline: txt2tags -\-target=html index.txt --> </BODY></HTML> @@ -32,7 +32,7 @@ June 2008 ``[`` [Demos demos/index.html] ``|`` [Download download/index.html] -``|`` [Developers doc/darcs.html] +``|`` [Developers doc/gf-developers.html] % ``|`` [Events doc/events.html] ``|`` [Libraries lib/resource/doc/synopsis.html] ``|`` [People doc/gf-people.html] @@ -195,7 +195,7 @@ support for an increasing number of languages, currently including + Hindi/Urdu (fragments) + [Interlingua http://www.interlingua.com/] + Italian -+ Norwegian bokmål ++ Norwegian bokm�l + Russian + Spanish + Swedish diff --git a/src/INSTALL b/src/INSTALL deleted file mode 100644 index 320ea3efc..000000000 --- a/src/INSTALL +++ /dev/null @@ -1,81 +0,0 @@ -To make and install GF (Updated for version 2.4 and 3.0beta). - -1. Unpack GF and go to the source directory (the place where this - INSTALL file is - so you have probably done this already!) - - tar xvfz GF-2.4.tgz - cd GF-2.4/src - -3. Make sure you have GHC (Glasgow Haskell Compiler), preferably version 6.8. - NOTICE: GHC 6.10 does not work with GF source yet. - - ghc --version - -4. If you are building the darcs version, run autoconf (in src/): - - autoconf - -5. Run configure - - ./configure - - If you want to install the GF somewhere other than /usr/local, use - the --prefix flag. E.g. - - ./configure --prefix=/usr - - If you experience problems with readline, try: - - ./configure --with-readline=no - - You may need to run "make clean" after ./configure when you change the - readline setting. - -6. Compile with GNU make: - - make - - or - - gmake - - (if your system has a proprietary make) - - The binary is sent to the file GF/bin/gf . - -7. Move files to their right places: - - make install - -8. To run GF, the following environment variables must be set: - - GFHOME the GF directory, e.g., "$HOME/project/GF-2.4" - GF_LIB_PATH the GF library directory, e.g,, "$HOME/project/GF-2.4/lib" - - (Usually, you do this in ~/.login, if your shell is any *csh, - or in ~/.profile, if your shell is either of sh, ksh, zsh or bash. - Afterwards, you have to start a login shell to have the settings available.) - -9. For a quick test: - Start gf, load a grammar and parse a string: - - cd $GFHOME/examples/tutorial/food - gf FoodIta.gf FoodEng.gf - - -- when gf has started and shows the prompt >: - - > parse "this cheese is very very Italian" | linearize -treebank - - -- this is the response from GF: - Is (This Cheese) (Very (Very Italian)) - this cheese is very very Italian - questo formaggio è molto molto italiano - - > generate_random | linearize -treebank - - > help - - -Author: Aarne Ranta, Björn Bringert 8/11/2004 -- 26/01/2006 -- 27/6/2008 - - diff --git a/src/INSTALL.binary b/src/INSTALL.binary deleted file mode 100644 index ef62b24af..000000000 --- a/src/INSTALL.binary +++ /dev/null @@ -1,38 +0,0 @@ -Installing a binary GF distribution: - -1. Untar the distribution file: - - $ gtar -zxf GF-2.8-[host].tar.gz - -2. Go to the created directory: - - $ cd GF-2.8-[host] - -3. Run configure: - - $ ./configure - - If you don't want to install the files under /usr/local, - run configure with the right installation prefix. E.g.: - - $ ./configure --prefix=/usr - -4. Install: - - $ make install - -If the above procedure should fail (e.g. you don't have "make" available), you -can do a manual install: - - 1. Untar the package and go to the GF directory, as 1-2 above. - - 2. The executable is the file "gf". You may want to move it somewhere - else, e.g. /usr/local/bin - - 3. The libraries are in the subdirectory "lib/". It is recommended to - create an environment variable GF_LIB_PATH pointing to that directory. - In the bash shell, you do - - $ export GF_LIB_PATH=[your gf directory]/lib - - |